Mould Release Agent

Falcon S-280C Dry Mold release agent

Category: Demoulding series
Brand: Falcon
Product model S-280C Dry Mould Release Agent
Packaging specifications 24 pcs / Carton
Capacity 450 ml / pcs | 550 ml / pcs

Product Description 

Falcon S-280C Dry release agent is a release agent prepared by using special grade raw materials.

 

 

Recommended Applications 

It is suitable for the demoulding of various types of plastic materials such as ABS, PC, PE, PS, PP, PVC, NYLON, ACRYLICS, SAN and so on. It has a good demoulding effect, does not pollute the surface of the finished product, and is especially suitable for demolding transparent products.

 

 

Instructions 

● Before spraying the release agent, the surface of the object to be sprayed is usually cleaned with a cleaning agent and dried. After cleaning, it can be blown dry with filtered dry compressed air, or dried with a dryer at 120-170 ℃.

● Before use, please shake the can upside down and shake the product to make the spray more uniform.

● When spraying, press the spray head so that the nozzle is vertically sprayed about 15-30cm away from the object (the distance and spray volume can be adjusted according to the actual situation of the workpiece and spray area).

 

 

Product Advantages 

● Good demolding effect, does not affect the secondary processing, cost-effective and cost-effective.

● Excellent lubricating performance, better protect the mold and prolong the service life of the mold.

● Good compatibility with most plastics.

● Good anti-rust and anti-corrosion performance, can provide temporary anti-rust and anti-corrosion effect to the mold.

● Mild odor, non-toxic, does not affect the operator's health;

● Good safety performance, the deformation of the spray can and the bursting pressure all meet the national standards;

● The manufacturer passed the SGS IECQ HSPM QC080000 Environmental Hazardous Substance Process Management System certification, which can effectively ensure that the products comply with the EU RoHS environmental protection directives and PAHS, PFOS testing from beginning to end.

 

 

Product Storage 

● All canned products are flammable, and the storage temperature should be below 50 ℃.

● For long-term storage, the stack height of cartons should not exceed 8 cartons.

● Handle the product with care, and do not use dangerous actions such as dropping, throwing, or bumping.

● The storage place should be ventilated, dry and cool. Direct sunlight or outdoor exposure is strictly prohibited.

● Do not knock and keep away from fire.

● Do not put it upside down.

 

 

Typical Data 

Test Items

Test Method

Unit

Test result

Color

Visual inspection

/

Transparent water white

Odor

/

/

Tasteless

Density@15℃

ASTM D1298

g∕ml

0.731

Kinematic viscosity @40℃

ASTM D445

mm2∕s

5.59

Copper corrosion

ASTM D130

1a

Internal pressure

GB/T14449

MPa

≤0.8

Ejection rate

GB/T14449

%

≥98

 

 

The above is typical data and does not represent product specifications. With the continuous updating of additives and the continuous emergence of new products, the above information may be changed at any time without notice. This data is for reference only.

Ask about this product