CN
Target TN01 NEW ENERGY HARNESS CLEANER is specially designed for high voltage
harness and low voltage control harness of electric vehicle (EV) and hybrid electric
vehicle (HEV), and is suitable for cleaning oil, oxide, colloid residue and
environmental pollutants on the harness surface. Products should meet the strict
requirements of high-voltage insulation, non-corrosiveness, environmental
protection, etc., to ensure the electrical conductivity and electrical safety of the
wiring harness.
● Quickly clean oil stains, oxides, colloid residues and environmental pollutants on the surface of the wire harness.
● Insulation plus, no corrosion.
● It will not corrode the metal surface.
● The product conforms to ROHS environmental protection directive and REACH and PAHS detection.
It is 15-20cm away from the surface to be cleaned, and it is sprayed directly on the surface at an angle of 45 degrees perpendicular or inclined to the surface. The surface is heavily greasy, so it can be left to soak for several minutes and then wiped with a brush or cotton cloth. If it is necessary to penetrate into the interior or pores of the object, it can be connected to the nozzle for use.
Test item | unit | typical data |
Density @15℃ | g∕ml | 0.9 |
exterior | / | Colorless and transparent |
internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only.
