CN
Falcon S-280E ultra-dry release agent is an ultra-dry silicone release agent prepared
from a variety of high-activity special siloxanes and additives.
●The demoulding times are many and the demoulding effect is good.
● The surface of the demoulded product is smooth and will not produce "oil flower".
●Excellent lubricating performance, better protecting the mold and prolonging the service life of the mold.
● Good compatibility with most plastics.
●Excellent rust and corrosion resistance, which can provide short-term rust and corrosion protection for the mold.
●Mild smell, non-toxic, does not affect the health of operators;
● Before spraying the release agent, the surface of the sprayed object should be cleaned with cleaning agent and the surface should be dried. After cleaning, it can be dried by filtered dry compressed air or dried by a dryer at 120-170℃.
● Before use, please shake the can body up and down properly to shake the product evenly, so as to make the sprayed mist more uniform.
● When spraying, press the nozzle so that the nozzle is about 15-30cm away from the object for vertical spraying (the distance and spraying amount can be adjusted according to the actual situation of the workpiece and the spraying area).
test item | unit | typical data |
colour | / | Colorless transparent liquid |
Density @15℃ | g∕ml | 0.70 |
copper strip test for petroleum products | / | 1a |
Kinematic viscosity at 40℃ | cSt | 1.06 |
internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only
