CN
Falcon S-270A oily release agent is a release agent refined from super silicone oil and
special additives.
● Very many demolding times, high cost performance and effective cost saving.
●High oil content and excellent stripping effect.
● Good compatibility with most plastics.
●Mild smell, non-toxic, does not affect the health of operators;
●The safety performance is good, and the deformation and blasting pressure of the spray tank are higher than the national standard;
● Before spraying release agent, the mold surface needs to be cleaned with cleaning agent and the surface needs to be dried. After cleaning, it can be dried by filtered dry compressed air or dried by a dryer at 120-170℃.
● Before use, please shake the can body up and down properly to shake the product evenly, so as to make the sprayed mist more uniform.
● When spraying, press the nozzle so that the nozzle is about 15-30cm away from the object for vertical spraying (the distance and spraying amount can be adjusted according to the actual situation of the workpiece and the spraying area).
test item | unit | typical data |
colour | / | Transparent water white |
smell | / | be tasteless |
Density @15℃ | g∕ml | 0.69 |
copper strip test for petroleum products | / | 1a |
internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only.
