CN
Biaozhun T80A oily release agent is a release product prepared from silicon synthetic
release agent and high-purity solvent.
●Good demoulding effect, multiple demoulding times, high cost performance and effective cost saving.
●Excellent isolation performance, better protecting the mold and prolonging the service life of the mold.
● Good compatibility with most plastics.
●Mild smell, non-toxic, does not affect the health of operators;
● Comply with RoHS environmental protection instructions, and pass REACH and PAHS tests, which is environmentally friendly
● Before spraying, the mold surface usually needs to be cleaned and dried with cleaning agent. After cleaning, it can be dried by filtered dry compressed air or dried by a dryer at 120-170℃.
● Before use, please shake the can body up and down properly to shake the product evenly, so as to make the sprayed mist more uniform.
● When spraying, press the nozzle so that the nozzle is about 15-30cm away from the object for vertical spraying (the distance and spraying amount can be adjusted according to the actual situation of the workpiece and the spraying area).
Test item | unit | typical data |
colour | / | Transparent water white |
smell | / | be tasteless |
Kinematic viscosity @40℃ | cSt | 250 |
copper strip test for petroleum products | / | 1a |
internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only
