CN
Darby YD200 transparent antirust agent is prepared from a variety of antirust
compounding agents and refined mineral oil. The oil film is thin and soft, and has
good antirust and anticorrosive properties, which can last for more than three years.
● Good antirust effect and high cost performance.
● The antirust oil film is thin and soft, easy to remove, and reduces the use of cleaning agents.
● Environmentally-friendly products, in line with EU RoHS environmental protection directives, have passed the tests such as REACH and PAHs.
●Non-toxic and harmless to human body; The smell is low and easy for operators to accept.
● Before spraying antirust agent, the surface of the sprayed object should be cleaned with cleaning agent and the surface should be dried. After cleaning, it can be dried by filtered dry compressed air or dried by a dryer at 120-170℃.
● Before use, please shake the can body up and down properly to shake the product evenly, so as to make the sprayed mist more uniform.
● When spraying, press the nozzle so that the nozzle is about 30cm away from the object for vertical spraying, and move it evenly or spray it for many times to form a white antirust film on the surface of the workpiece.
● After spraying, place the workpiece in a ventilated and dry environment for 24 hours.
Test item | unit | typical data |
Rust-proof salt spray test | h | ﹥72 |
Moisture test | h | ﹥250 |
internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only
