CN
The cleaning agent for dart quasi-screw is made of high-quality decoloring agent and special surfactant. The water-based product is environmentally friendly and contains no organic solvent and heavy metal, which can effectively remove any colorant and save the time of color change.
1. High dissolving capacity, saving color change time and not damaging the screw;
2. It contains active ingredients, which can form a protective film on the surface of the screw to prevent the screw from rusting and pigment pollution.
3. The environmental protection formula does not contain organic solvents and heavy metals, which meets the requirements of environmental protection.
4. The dosage is small, and only 100-200ml cleaning agent is needed to clean an 8 A injection molding machine.
Spray wet washing material with cleaning agent (about 5 injections) and mix well; 1-2 minutes after storage, extrude the plastic and repeat the above procedure. Clean the gate, add the required plastic, and then squeeze out the remaining materials to make normal injection molding.
Test item | unit | typical data |
Appearance | / | Colorless and transparent |
Density @ 15 ℃ | kg/l | 1.0 |
PH value (5% deionized water) | / | 8.5-9.5 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only.
