CN
Falcon S-300E ultra-dry release agent is a high-tech release agent made of special non-silicone oil raw materials and anti-wear and lubrication additives.
●Good demoulding effect, no influence on secondary processing, high cost performance and effective cost saving.
●Excellent lubricating performance, better protecting the mold and prolonging the service life of the mold.
● Good compatibility with most plastics.
●Mild smell, non-toxic, does not affect the health of operators;
●The safety performance is good, and the deformation and bursting pressure of the spray tank meet the national standards;
● The manufacturer has passed the SGSICQ HSPM QC 080000 environmental hazardous substance process management system certification, which can effectively ensure that the products meet the EU RoHS environmental protection directive and PAHS detection from beginning to end.
● Before spraying the release agent, the surface of the sprayed object should be cleaned with cleaning agent and the surface should be dried. After cleaning, it can be dried by filtered dry compressed air or dried by a dryer at 120-170℃.
● Before use, please shake the can body up and down properly to shake the product evenly, so as to make the sprayed mist more uniform.
● When spraying, press the nozzle so that the nozzle is about 15-30cm away from the object for vertical spraying (the distance and spraying amount can be adjusted according to the actual situation of the workpiece and the spraying area).
test item | test method | unit | typical data |
colour | estimate range by eye | / | Transparent yellow liquid |
smell | / | / | be tasteless |
Density @15℃ | ASTM D1298 | g∕ml | 0.714 |
Kinematic viscosity @40℃ | ASTM D445 | mm2/s | 0.551 |
copper strip test for petroleum products | ASTM D130 | / | 1a |
internal pressure | GB/T14449 | MPa | ≤0.8 |
Ejection rate | GB/T14449 | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only.
