CN
Falcon s-300d super dry release agent is refined from selected non silicone oil raw materials, which will not produce "silicone oil phenomenon", has good lubrication and release performance.
● it does not contain silicone components and will not cause "Silicon phenomenon" in the product.
● good demoulding performance and high cost performance.
● the surface of the demoulded product is smooth and smooth, without "oil spray".
● it will not cause swelling, cracks and other phenomena to most plastics and rubbers.
● the odor is mild, non-toxic and does not affect the health of the operator.
● before spraying the release agent, the surface of the sprayed object shall be cleaned with cleaning agent and dried. After cleaning, it can be dried with filtered dry compressed air or with a dryer at 120-170 ℃.
● before use, please turn the tank upside down and shake the product evenly to make the spray more uniform.
● during spraying, press the nozzle to make the nozzle spray vertically about 15-30cm away from the object (the distance and spraying amount can be adjusted according to the actual situation of the workpiece and the spraying area).
Test item | unit | typical data |
Color | / | light yellow |
Density @ 15 ℃ | g∕ml | 0.66 |
Copper corrosion | / | 1a |
Internal pressure | MPa | ≤0.8 |
Ejection rate | % | ≥98 |
The above data are typical and do not represent product indicators. The above information is subject to change without notice due to the update of additives. This data is for reference only.
